keyboard_arrow_right

Lathe die head

Ingersoll Rand 1/4" Air Die Grinder 3107G

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size: 3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle.

Buy lathe die head from Amazon.com
  • Long-life ball bearing construction
  • Self-locking lever throttle
  • Rear exhaust
  • Ergonomic grip


Buy lathe die head from Amazon.com


Tap and Die Set for Creating Wood Threads - 1/2 inch

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

A fine three-part set in sizes from 1/2" to 1-1/2". The two-handled threadbox cuts the male threads, a matching tap die cuts the internal female threads, and a bottoming tap finishes off the female section.Threadbox is made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter.Scroll down or click here for more information on the Tap and Die Set.

Buy lathe die head from Amazon.com
  • Three-part set in sizes from 1/2 inch to 1 and 1/2 inches
  • Two-handled threadbox cuts male threads, while matching tap die cuts internal female threads
  • Bottoming tap finishes off the female section
  • Made of long-lasting hardwood with internal aluminum wear fittings and a steel cutter

Buy lathe die head from Amazon.com


Lathe Tailstock Die Holder 3MT Shank- Tapping Threading Reaming Drilling 65 mm Chuck

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

1/. A very useful Tapping , Threading, Reaming & Drilling solution on Lathe Machine 2/. The Head Slides up and down very smoothly on the Shank 3/. Shank is 3MT -Hard & Precisely Ground 4/. Die Holders are interchangeable & Can hold Die sizes of 13/16", 1", 1-5/16" & 1-1/2". 5/. 65 mm 3 Jaw Self Centering Chuck is Included with a Back Plate having M14 x1 threaded Spigot 6/. Fast Shipping from Outside USA

Buy lathe die head from Amazon.com
  • A very useful Tapping , Threading, Reaming & Drilling solution on Lathe Machine
  • The Head Slides up and down very smoothly on the Shank
  • Shank is 3MT -Hard & Precisely Ground
  • Die Holders are interchangeable & Can hold Die sizes of 13/16", 1", 1-5/16" & 1-1/2".
  • 65 mm 3 Jaw Self Centering Chuck is Included with a Back Plate having M14 x1 threaded Spigot



Buy lathe die head from Amazon.com


Valianto 1/8" (3mm) Air Micro Grinder, Pneumatic Pencil Die Grinder Polishing Engraver Tool Kit, 58000 RPM Free Speed

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Item: Air Micro Grinder / Pneumatic Pencil Die Grinder Kit
SPECIFICATIONS:
Weight:0.7kg
Air inlet size:1/4"
Air Pressure: 90PSI
Length of Hose: 133cm/52.36in
Length of Hose: 13cm/5.2in
Collet size:3mm (1/8")
Free speed:58000RPM
Avg. Air Consumption: 2CFM (57L/M)

PACKAGE INCLUDES:
1 x Micro Air Grinder
1 x Mini- Oiler
1 x 52 "air hoses
1 x Oil Pot(without oil)
2 x Hand Wrenches
10 x Mounted Stones
1 x 1/4" FNPT connector
The kit came in the blue plastic case, total 17pcs.

Application:
All kinds of metal precision grinding
Cleaning of various metals, chamfering, grinding, carving, internal processing
Cutting plastic, stone, wood, etc., grinding, polishing
Various types of welding surface grinding

About Us:
Valianto offers superior quality and dependable tools to every do-it-yourself consumers, whether you are a classic car enthusiast or a DIY homeowner. From Pneumatic tools, Power tools, to Hand tools, Valianto always committed to providing professional-level quality at a fair and affordable price. Valianto Tools bring you the best level of fun and adventure with well-made and durable products.

Buy lathe die head from Amazon.com
  • Specification-----1/8" Collet-----1/4" Air Inlet-----2 CFM Avg. Air Consumption
  • Working-----58000 RPM Free Speed-----90PSI Air Pressure-----High-speed pencil type grinder, can adapt to high speed precision machining Sophisticated interior design, easy use and durable.
  • Speed Control-----Pencil Type Micro Air Die Grinder features a variable speed throttle control.
  • Hose Protector-----Convenient hose with hose protector. Rear exhaust to prevent the chip flying anti-chip scattering and reduce noise.
  • Occasion-----All kinds of metal precision grinding,Cutting plastic, stone, wood, etc., grinding, polishing, Clean jewelry, dies, rotors, backing plates, brake pads, cylinder heads, mounts and many other applications; suitable for hobby use






Buy lathe die head from Amazon.com


FLOATING TYPE DIE HOLDER SET-IMPERIAL DIE SIZES //LATHE ENGINEERING THREADING TOOLS-QUICK DELIVERY !! (3MT SHANK)

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Holders are held on the shank by a pin which locate in slots on either side of the holder allowing about 1-1/2" of travel-Any other Lathe . Can hold Die sizes of 13/16", 1", 1-5/16" & 1-1/2". Die Holders can be interchanged very easily. The Head Slides up and down very smoothly on the shaft. AN EJECTING PIN (* NOT SHOWN IN PHOTOGRAPHS) WILL ALSO BE INCLUDED TO EJECT THE DIE EASILY FROM THE HOLDERS )

Buy lathe die head from Amazon.com
  • QUALITY TOOL STEEL DIE HOLDERS -FLOATING DESIGN FOR YOUR LATHE MACHINE
  • 3MT SHANK IS HARDENED & PRECISELY GROUND. AVAILABLE BOTH IN 2MT AS WELL AS 3 MT MORSE TAPERS.
  • HOLDERS ARE HELD ON THE SHANK BY A GUIDING PIN WHICH LOCATES IN THE SLOTS ON EITHER SIDE OF THE HOLDERS, ALLOWING APPROX 1.5" TRAVEL FOR THREADING THE WORK-PIECE.
  • CAN HOLD IMPERIAL DIE SIZES 13/16" , 1", 1-5/16" & 1-1/2" OD. HOLDERS ARE INTERCHANGEABLE .
  • QUICK FAST SHIPPING THROUGH TRACKABLE AWB NO. TO USA AND WORLWIDE



Buy lathe die head from Amazon.com


JANSANE Sewing Machine Light LED Lighting (30LEDs) 6 Watt Multifunctional Flexible Gooseneck Arm Work Lamp with Magnetic Mounting Base for Workbench Lathe Drill Press Gray

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Specification:
Number of LED: 30pcs
Working Power: 6W
Light Color: White
Gooseneck Length: 8 inch
Total Length: 12 inch
Cable Length: 54.3 inch
AC: 110220V,50/60HZ

PRODUCT FEATURES:

Safe and Vison Protection:
No radiation, zero stroboscopic and not dazzling

Strong Magnetic Base
Can be solidly attached to any steel surface such as workbench, lathe, drill press and milling/sewing machine.
No need to worry it will sagg or fall down during working.

Energy saving & Long Life Expectancy
90 energy saving comparing to the traditional light and up to 50,000 hours life expectancy

360Rotation gooseneck
Easily to be adjusted to any accurate angle for your specific work

100 Satisfaction Guarantee
12-Month Warranty; No satisfied ,Free reason for return;
We could also resent you new one due to quality problem.

Buy lathe die head from Amazon.com
  • BRIGHT LIGHT & VISION PROTECTION-Equiped with 30 pcs LED, this sewing machine LED light is very bright and natural to sunlight,(No radiation, zero stroboscopic and not dazzling) which will not do harm on your eyes for long-time working. Perfect for protecting vison and eyes.
  • STRONG MAGNETIC BASE- Coming with strong magnetic base, this magnetic LED light coulld attach to any metal surface such as workbench, lathe, drill press and milling/sewing machine. The strong magnet could make it stable and secure despite of the vibration and shock during working. Very easy to install and convenient to use.
  • 360 ROTATION GOOSENECK-This gooseneck led lamp with long flexible rotation neck allow you to easily adjust it to any illumination angles you specific need. Besides, this led flexible light is also benchable and protable, and you could take it any where you need.
  • WIDE APPLICATION-This LED work light not only used for workbench, lathe, drill press and milling/sewing machine for work, but also used as desk lamp at home for learning, reading magzine and doing handwork. Small led light, but very pratical and multifunctional.
  • ENERGY SAVING & LONG LIFE EXPECTANCY -This led sewing lamp could save up to 90 energy comparing to the traditional light. Its life expectancy is up to 50,000 hours. More durable and long-lasting than the incandescent lights.








Buy lathe die head from Amazon.com


Chicago Die Casting 1416 V-groove 4-step Pulley, 5/8"

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

The Chicago die-cast, V-groove, four-step pulley comes with hollow head set screws. For belts size 4L or 1/2 by 11/32 inches. Dimensions: 4-inch diameter with 5/8-inch bore.

Buy lathe die head from Amazon.com
  • Sold on Amazon
Buy lathe die head from Amazon.com


HYCC 10 pc Roloc Style 2" Compressed Wool Fabric QC Disc Polishing Buffing Pads Wheels

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Description
Set of 10 - 2" Wool Roloc Style QC Disc Polishing Buffing Pads Wheel for use with 2" Sanding Disc & Wheel Holder Pad With 1/4" Shank Mandrel.
It gets good effect and high service life. High efficiency, high quality Save time and working procedure easy to use.
Max Speed: 2500rad/min (lower speed at first)

Package Include:
10* 2" Disc Polishing Buffing Pads
Weight:
100g

Buy lathe die head from Amazon.com
  • Ideal for polishing chrome
  • Great for many different types of polishing and buffing projects
  • Great for wide variety of surfaces - stainless steel & other metals, wood, synthetics & more
  • 100 natural compressed wool - favored for superior buffing properties, versatility & durability
  • Set of 10 - 2" Wool Roloc Style QC Disc Polishing Buffing Pads Wheel for use with 2" Sanding Disc & Wheel Holder Pad With 1/4" Shank Mandrel



Buy lathe die head from Amazon.com


PROSHI 1/4-Inch Angle Air Die Grinder, Mini Air Angle Die Grinder, pneumatic angle die grinder, 90 Degree Angled Air Die GrinderEdge Series Air Angle Die Grinder, Polished color

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Product details:
Stepless speed control knob switch: According to different purposes, choose different speeds to meet different needs
Air inlet and exhaust port: air inlet filter design, effectively filter air impurities, humanized annular exhaust design, more environmentally friendly.
Industrial grade 1/4" chuck: high concentricity, small yaw, low vibration, high wear resistance, no heat, stable operation.
Plate-type start-stop switch: safe pressure plate type start-stop switch, more reliable and more reliable.

1/4" (6.35mm) high-precision collet: high-temperature carburizing, adapt to greater impact strength, precision CNC lathe processing, not easy to deform, bolt specifications: M6

Product parameters:
Collet size 1/4" (6.35mm)
No-load speed: 20000 RPM
Air consumption: 2.8 CFM, 80L/min.
Pressure: 90 Psi.
Power: 0.6HP
Air inlet specification: Air Inlet: 1/4"
Product weight: 0.49Kg.

Buy lathe die head from Amazon.com
  • The 90-degree head allows flexibility in many applications, for reaching tight or angled grinding.
  • Variable-speed throttle ramps up to maximum RPM, Built-in air regulator for precise speed control.
  • Lightweight aluminum body, Rear exhaust, Durable ball-bearing motor.
  • Sealed ball bearing design keeps out contaminants promoting smooth operation.
  • Suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, engraving.







Buy lathe die head from Amazon.com


DRILLPRO 8 Pcs Double Cut Carbide Rotary Burr Set 6mm (0.24 inch) Shank File Power Tools Double Cut

Buy lathe die head
Check Price on Amazon
Buy lathe die head from Amazon.com

Description:

Double Cut Carbide Rotary Burr Set Carbide Rotary Burrs are used for cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material (deburring)

Specifications
Material: Carbide alloy
Shank diameter: 0.24 inch (6mm)
Groove: Double Rotary
Quantity: 8pcs/set

Set includes
SA-5: Cylindrical shape 1/2" x 1"
SA-3: Cylindrical shape 3/8" x 3/4"
SC-3: Cylindrical radius end 3/8" x 3/4"
SC-1: Cylindrical radius end 1/4" x 5/8"
SD-1: Ball shape 1/4"
SD-3: Ball shape 3/8"
SF-3: Tree shaped radius end 3/8" x 3/4"
SF-5: Tree shaped radius end 1/2" x 1"

How to use Drillpro Double Cut Carbide Rotary Burr Set
The carbide rotary file is mainly driven by electric tools or pneumatic tools (also can be installed on machine tools), and the rotational speed is generally 6000-40000 RPM.
When used, the cutting direction should be moved evenly from right to left, not reciprocating cutting.

What should pay attention to
Avoid the pressure of adding too much pressure when the grinding machine is smaller, so that the file will become overheated and dull.
Avoid contact with the workpiece because it will overheat the file and damage or even destroy the copper welding head.
It can be used in combination with lubricants, liquid wax lubricants and synthetic lubricants, which can be regularly added to the file.

Why Choose DRILLPRO
Good quality and reliable brand.
Within 90 days product quality is not completely satisfied, please CONTACT US, 100 refund.

Buy lathe die head from Amazon.com
  • High Production Efficiency processing efficiency dozens of times than the manual files and the small wheel with a handle. Can replace the handle with a small wheel, and no dust pollution.
  • High Quality Processing High degree of finish, can produce a variety of high-precision mold cavity.
  • Long LifeIt is ten times more durable than high speed steel and more than 200 times higher than alumina grinding wheel
  • Simple Operation, Safe and Reliableit can reduce labor intensity and improve working environment.
  • Usagecarbide rotary file is widely used in metal products, tool manufacturing, engineering, model construction, woodcarving, jewelry making, welding, chamfering, casting, deburring, grinding, cylinder head transplant and sculpture.






Buy lathe die head from Amazon.com


Lathe die head