keyboard_arrow_right

Wide 5 hub

Southwest Wheel 5-Hole, 4.5" Bolt Circle Idler Hub for 3,500 lb. Axles

Buy wide 5 hub
Check Price on Amazon
Buy wide 5 hub from Amazon.com

Description:

Kit Contains: 1 - 10215WS 5-4.5" Idler Hub 1 - HL154A Grease Cap 1 - L44649 Outer Bearing (1 1/16" ID) 1 - L68149 Inner Bearing (1 3/8" ID) 1 - 55846DL Seal 5 - X1023R Nuts

Buy wide 5 hub from Amazon.com
  • 5 studs 4.5" bolt circle (2 5/8" from center of one stud to the center of the next stud)
  • Contains inner bearing, outer bearing, seal, grease cap and lug nuts.
  • Fits a #84 Spindle using L68149 inner and L44649 outer bearing.
  • Hubs are pre-raced & pre-studded.







Buy wide 5 hub from Amazon.com


Southwest Wheel 5-Hole, 4.5" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle)

Buy wide 5 hub
Check Price on Amazon
Buy wide 5 hub from Amazon.com

Description:

Kit Contains: 1 - KW71051WS - 5-4.5" Idler Hub 1 - OEHL154A Grease Cap 2 - OEL44643 Bearings (1" ID) 1 - T534823 Seal 5 - WPX1023R Nuts

Buy wide 5 hub from Amazon.com
  • 5 studs 4.5" bolt circle using L44643 inner and outer bearings.
  • Contains inner bearing, outer bearing, seal, grease cap and lug nuts.
  • Fits a BT8 Spindle (1" OD)
  • Hubs are pre-raced & pre-studded.







Buy wide 5 hub from Amazon.com


Southwest Wheel 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub

Buy wide 5 hub
Check Price on Amazon
Buy wide 5 hub from Amazon.com

Description:

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

Buy wide 5 hub from Amazon.com
  • 1 1/4" Diameter, 4" long shaft, BT8 1" spindle.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 5-4.5" BT8 hub pre raced and studded.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Buy wide 5 hub from Amazon.com


Detroit Axle Both (2) New Front/Rear Driver & Passenger Side Complete Wheel Hub and Bearing Assembly - 5-Lug

Buy wide 5 hub
Check Price on Amazon
Buy wide 5 hub from Amazon.com

Description:

  • 2x New Front Driver & Passenger Side Complete Wheel Hub and Bearing Assembly 5-Lug - 513288 x2


Fitment:
5-Lug w/ ABS
  • 2010 Buick Allure (FRONT AND REAR ALL MODELS)
  • 2011-2016 Buick Regal (FRONT AND REAR ALL MODELS)
  • 2010-2016 Buick Lacrosse (FRONT AND REAR ALL MODELS)
  • 2013-2016 Cadillac XTS (FRONT AND REAR ALL MODELS "NO HD BRAKES")
  • 2014-2016 Cadillac CTS (FRONT FOR AWD ONLY)
  • 2013-2016 Chevrolet Malibu (FRONT AND REAR ALL MODELS)
  • 2014-2017 Chevrolet Impala (FRONT AND REAR FOR ALL MODELS)
  • 2010-2016 Chevrolet Equinox (FRONT FOR ALL MODELS)
  • 2010-2016 GMC Terrain (FRONT FOR ALL MODELS)
  • 2010-2011 Saab 9-5 (FRONT AND REAR ALL MODELS)

  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket.

    Buy wide 5 hub from Amazon.com
    • 5-Lugs
    • Detroit Axle Brand - Highest Quality - Built to meet OEM Specifics
    • Internal Ball-Bearing OEM Design
    • For - 2010 Buick Allure (FRONT AND REAR ALL MODELS) - 2011-2016 Buick Regal (FRONT AND REAR ALL MODELS) - 2010-2016 Buick Lacrosse (FRONT AND REAR ALL MODELS) - 2013-2016 Cadillac XTS (FRONT AND REAR ALL MODELS "NO HD BRAKES") - 2014-2016 Cadillac CTS (FRONT FOR AWD ONLY) - 2013-2016 Chevrolet Malibu (FRONT AND REAR ALL MODELS)
    • For - 2014-2017 Chevrolet Impala (FRONT AND REAR FOR ALL MODELS) - 2010-2016 Chevrolet Equinox (FRONT FOR ALL MODELS) - 2010-2016 GMC Terrain (FRONT FOR ALL MODELS) - 2010-2011 Saab 9-5 (FRONT AND REAR ALL MODELS)
    Buy wide 5 hub from Amazon.com


    CE Smith Trailer 1-1/16" Stud (5 X 4 1/2) Galvanized Trailer Hub Kit

    Buy wide 5 hub
    Check Price on Amazon
    Buy wide 5 hub from Amazon.com

    Description:

    CE Smith 13315, Pkg trailer hub kit, 1-1/16 inch stud (5 x 4-1/2), galvanized. These hubs come fully assembled with pre-greased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. 1350 pound capacity.

    Buy wide 5 hub from Amazon.com
    • 5 stud x 4.5 inch bolt circle diameter
    • 1-1/16 inch Straight shaft
    • 6-1/2 inch wheel Flange diameter
    • 14 inch maximum wheel size
    • 1.98 inch hub inner diameter

    Buy wide 5 hub from Amazon.com


    Southwest Wheel 5-Hole, 5" Bolt Circle Idler Hub for 3,500 lb. Axles

    Buy wide 5 hub
    Check Price on Amazon
    Buy wide 5 hub from Amazon.com

    Description:

    Kit Contains: 1 - 10415WS 5-5" Idler Hub 1 - HL154A Grease Cap 1 - L44649 Outer Bearing (1 1/16" ID) 1 - L68149 Inner Bearing (1 3/8" ID) 1 - 55846DL Seal 5 - X1023R Nuts

    Buy wide 5 hub from Amazon.com
    • 5 studs 5" bolt circle (3" from center of one stud to the center of the next stud)
    • Contains inner bearing, outer bearing, seal, grease cap and lug nuts.
    • Fits a #84 Spindle using L68149 inner and L44649 outer bearing.
    • Hubs are pre-raced & pre-studded.







    Buy wide 5 hub from Amazon.com


    Tomegun 4 to 5 Lug Wheel Bearing Conversion Hub Rear Pair For 89-99 S13/S14 Nissan 240SX

    Buy wide 5 hub
    Check Price on Amazon
    Buy wide 5 hub from Amazon.com

    Description:

    Pair of Rear Hubs will work with S13 and S14

    Buy wide 5 hub from Amazon.com
    • Converts hubs from 4 x 114.3 to 5 x 114.3 to allow use of 5 lug wheels, 300ZX/S14 Calipers, 300ZX/S14 Rotors. Can also re-use S13 calipers.
    • Bearings and already pressed in, pre-lubed, and ready to install, DIY friendly
    • CNC machined high quality forged steel
    • Steel studs included. Works with ARP extended wheel studs (Sold separately).
    • Formerly known as Contano Wheel Hubs








    Buy wide 5 hub from Amazon.com


    Rigid Hitch Pair of 5-Bolt On 4-1/2 Inch Hub Assembly (AKSQ-3500545) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

    Buy wide 5 hub
    Check Price on Amazon
    Buy wide 5 hub from Amazon.com

    Description:

    Easily build your own axle with this 3,500 lb rated hub assembly. This kit includes (2) - 5-Bolt on 4-1/2 inch bolt center hubs for 3,500 lb axles, (2) - 1-3/8" to 1-1/16" tapered spindles, (2) castle nuts, (2) cotter pins, (10) 1/2-20 lug nuts, (2) 2.561" O.D - 1.719" I.D double lipped grease seals, (2) L-44649 1-1/16" I.D bearings, (2) L-68149 1-3/8" bearings, (2) spindle washers, and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

    Buy wide 5 hub from Amazon.com
    • Pair of 1-3/8" to 1-1/16" tapered spindles.
    • Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D
    • Hubs have pre-installed pressed in races.
    • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
    • Spindles feature a SQUARE 1-3/4" stock diameter with a tapered spindle surface of 1-3/8" & 1-1/16"



    Buy wide 5 hub from Amazon.com


    LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle - 22017K

    Buy wide 5 hub
    Check Price on Amazon
    Buy wide 5 hub from Amazon.com

    Description:

    Bolt pattern: 5 on 4.5"; 1/2"-20 studs installed; bearing races installed; Kit also included: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings; 2 x Grease seals 1.719" x 2.565",; 2 x E Z lube grease caps with rubber plugs; 10 cone wheel nuts 1/2"-20 thread ; Works on most 3500 lbs axles in the market; This hub has been wholesaling by large volume to trailer axle manufacturers, we could sell cheap due to our volume!

    Buy wide 5 hub from Amazon.com
    • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle
    • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed
    • Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread
    • Libra Trailer Parts has been supplying US trailer manufacturers OEM parts 15 years.
    • These trailer hub assembly is exclusively sold by Libra Trailer Part. Product from any othe sellers is not guranteed for quality!


    Buy wide 5 hub from Amazon.com


    CE Smith Trailer Tapered 1-3/8" to 1-1/16" Stud (5 X 4 1/2) Galvanized Trailer Hub Kit

    Buy wide 5 hub
    Check Price on Amazon
    Buy wide 5 hub from Amazon.com

    Description:

    CE Smith 13515, Pkg trailer hub kit, tapered 1-3/8" to 1-1/16" stud (5 x 4-1/2), galvanized. These hubs come fully assembled with pre-greased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. 1750 pound capacity.

    Buy wide 5 hub from Amazon.com
    • 5 stud x 4.5 inch bolt circle diameter
    • 1-3/8" tapered to 1-1/16" shaft
    • 6-1/2 inch wheel Flange diameter
    • 15 inch maximum wheel size
    • 1.98 inch hub inner diameter
    Buy wide 5 hub from Amazon.com


    Wide 5 hub