Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs LCD Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors Power Supply 01435
* NiMH/NiCD 115 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 16 series ( 3.7v to 22.2v) * Li-Fe 16 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately. Charger Specifications: DC 11V15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 1118 volts AC 100240V, 50/60Hz Charge/discharge power max. 50/5 Watts Pb 220V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Dimension 130x85x33 mm< User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V ###Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)
- BATTERY VARIETY CHARGING - Have the Tenergy TB6-B balance charger/discharger and power supply for all of your battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
- BONUS ACCESSORIES - The AC balance charger comes with octopus multi-charging harness with tamiya, mini tamiya, JST, HiTec, EC3, Deans connectors to be compatible with many charging connectors. Package also comes with a power supply.
- WIDE VOLTAGE COMPATIBILITY - Use the battery pack balance charger on NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V.
- MULTIPLE FUNCTIONS - More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging and discharging and much more for all of your battery packs.
- EASY TO READ - View all charging statuses and settings on the Electronic Balance Charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes a 12-month warranty.
Venom Pro Charger 3 RC LiPo and NiMH Battery Balance AC/DC Powered Charger
Venom is yet again proud to introduce a follow-up to the wildly successful Pro Charger series. The Venom Pro Charger 3 has a new ergonomic case design and features an integrated power supply, on-board balance block and supports charging rates up to 7.0amps. This AC/DC powered multi-chemistry balance charger is micro processor controlled, fan cooled and can handle Lithium LiPo batteries up to 6S, NiMH/NiCd batteries from 1-15cells and Lead Acid batteries from 1-10 cells (2v to 20v). The Venom Pro 3 also boasts many high end features such as multiple discharge profiles and recallable memory profiles for up to five of your most commonly used batteries. The Venom Pro 3 also comes with eight of the most popular charging leads including XT60, Deans, EC3, EC5, Tamiya, receiver pack, JST, and alligator clips for trouble free connection to the most popular batteries on the market. This feature rich charger is worthy of the Pro Charger pedigree and comes to you at a reasonable price.
- Included Charge Leads: Alligator, Deans, EC3, EC5, JST, Receiver (RX), Tamiya, XT60
- LiPo/LiFe/Li-Ion Cell Count: 1-6 Cell
- NiCd/NiMH Cell Count: 1-15 Cell
- Pb Battery Voltage: 2-20V
- Charge Current: 0.1 - 7.0A
- Discharge Rate: 0.1 - 1.0A
- Circuit Power: 100W
- Current Drain Balancing: 300mAh per Cell
- Input: DC 11.0V-18.0V - AC 100V-240V
- Display Type: LCD
- Length: 136mm (6.1 in)
- Height: 56mm (2.2 in)
- Width/Diameter: 127mm (5 in)
- Weight: 14 oz (400g)
- Charge Current: 0.1-7.0A
- Cell Count LiPo/LiFe/Li-ION: 1-6 Series
- Cell Count NiMH/NiCD: 1-15 Cell
- Pb Voltage: 2-20V
- Programmable thermal temp alarm with auto shut down
Venom Racing 0683 2-4 Cell AC/DC Lipo Battery Balance Charger
The Venom 2-4 AC/DC lipo battery balance charger is a great solution for entry level to intermediate RC hobby enthusiasts. This VNR0683 comes equipped with single 3 Cell, 4 Cell, as well as dual 2 Cell Charge ports capable of charging two 2S batteries simultaneously. This charger includes many great features including Auto detection of current Rate and capacity of individual cells, identifying the Cell Count automatically, automatic cut-off for safety and a temperature protection function and adjusts the Charge power automatically when overheating.
- Charge Current: 0.1-3.0A, Input: AC 100-240V / DC 10-18V
- Charge 2 - 2 cell LiPo/LiFe batteries at the same time or 1-3 cell or 1-4 cell.
- Easy to use simple compact design.
- Large Blue 2.5in LCD Display
- Supports JST-XH 2.5 Port Connectors
Redcat Racing HX-403 Hexfly Lipo Battery Charger
Redcat Racing Part # HX-403 lipo battery charger. Compatible with LiPo and life batteries. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!
- Genuine Redcat Racing Replacement part # HX-403
- Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.
- Please consult your user's manual to ensure this is the correct part for your model.
- For troubleshooting and Warranty information please contact a Redcat Racing customer service specialist at 602-454-6445 or by emailing [email protected]
- Compatible with LiPo and life batteries.
- Charges at up to 3A
- Can charge two 2S batteries at the same time, or one 3S/4S battery.
B680AC CAR Dual Power (6Amps, 80Watts): LiPo, LiIon, LiFe, NiCd, NiMh AC/DC Balancing Battery Charger w/ Deans T-Plug, Traxxas High Current, Tamiya/Kyosho/Molex, HXT4.0mm Bullet Redcat, EC3/EC-3 Plugs
Charges LiPo, LiON, LiFe (1S-6S cells)
Charges NiMh, NiCd (1-15 cells)
Charges Lead-Acid (2V-20V)
Charging, Discharging, Cycling, Balancing (LiPO/LiION/LiFE cells) (1-5 cycles)
User definable charge rates from 0.1 amps to 6.0 Amps
80 Watt max output. Charge Amps auto adjusts based on battery voltage. (Charge rate 4S LiPo: 80W/14.8V=5.4A)
JST-XH Balance Port Built In (Balances 2S-6S Batteries)
5 Charging Cables
Lithium (LiPo, LiIo, LiFe)
-Storage Mode (Half charge, best for long term non-use)
Pb (Lead Acid)
-Voltage Select (Set charger to LiPo, LiIo, LiFe)
-NiMh Peak Sensitivity
-NiCd Peak Sensitivity
-USB or Temp Port
-Key Beep/Buzzer Setting
-Input Power Cutoff
Operating Voltage Range: AC 100 - 240V / DC 11 - 18V
Circuit Power: Max. 80W charging, Max. 10W discharging
Charge Current Range: 0.1 - 6.0A
Discharge Current Range: 0.1 -2.0A
Current Drain for Balancing:: 300mAh/cell
NiCd/NiMH Battery Cell Count: 1 - 15 Cells
Lithium Battery Cell Count: 1 - 6 Series
Pb Battery Voltage: 2 to 22V
Dimensions: 135mm x 112mm x 60.9mm
- HIGH POWER: 80 Watts lets you charge faster. Especially needed with High Voltage 3S LiPo and up.
- AC/DCPOWER & WORLDWIDE VOLTAGE COMPATIBLE: Plug it into the wall or hook it up to your car battery.
- PERFECT CHARGING PACKAGE for LiPo LiOn LiFe NiMh NiCd Pb! AC/DC, Charge, Discharge, Balance, Cycle.
- INTEGRATED COOLING FAN: Ready for all-day R/C at the track, pond, backyard or favorite driving spot.
- FEATURES: Made by ProLead RC. Storage Mode. Save/Load. Safety: Capacity Temp* Time DC Low Vol cutoff.
HOBBYMATE Imax B6 Clone Lipo Battery Balance Charger, Rc Hobby Battery Balance Charger LED W/ AC Power Adapter
Note: This is NOT originally from SKYRC imax B6 charger, but a CLONE B6 charger, NO anti-fake lable or yellow label on back; But with same making and functions, high quality and one-year warranty
***Max wattage for this charger is 50W, please make sure your battery is in that range before bid***
Item: iMAX B6 2.5" LCD RC Lipo Battery Balance Charger (100240V/US Plug)
Dimensions: 5.28 in x 3.39 in x 1.06 in (13.4 cm x 8.6 cm x 2.7 cm)
Weight: 25.75 oz (730 g)
Rapid charger/discharger for all kind of battery of RC hobby, with built in balancer for lipo battery, Li-ion/Polymer battery, Ni-MH/Cd battery, even Pb battery
- Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
- Microprocessor controlled Delta-peak sensitivity
- Large range of charge currents Store function, allows safe storage current
- Input voltage monitoring. (Protects car batteries at the field)
- LCD display
- Charge current range: 0.15.0A
- Current drain for balancing Li-po: 300mAh/cell
- NiCd/NiMh battery cell count: 115cell
- Li-ion/Polymer cell count: 16series
- Pb battery voltage: 2v to 50v
- AC Adapter: Input: US plug, 100-240V, 50/60Hz. Output: 12V 5A
1 x B6 Lipo Battery Charger
1 x 12V 5A AC/DC Power Adapter (US plug)
1 x Instuction manual
- 1. Rapid charger/discharger for all kind of battery of RC hobby, with built in balancer for lipo battery, Li-ion/Polymer battery, Ni-MH/Cd battery, even Pb battery
- 2. Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
- 3. Microprocessor controlled Delta-peak sensitivity
- 4. Large range of charge currents Store function, allows safe storage current
- 5. AC Adapter: Input: US plug, 100-240V, 50/60Hz. Output: 12V 5A; Important Remind: plug the power supply to the charger unit before attaching it to ac power
Genuine SKYRC iMAX B6AC V2 AC/DC Dual Power Professional LiPo Battery Balance Charger/Discharger
SKYRC B6AC V2 is the upgraded version for well-known iMAX B6AC. Compared with iMAX B6AC, it is more accurate and stable and also has some new features and functions. Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. What's more, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safer than V1. SKYRC B6AC V2 is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium High Voltage,Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 6A charge current and maximum 50W charge power.
- SkyRC iMAX B6AC V2 Charger(Model SK-100008)
- Input: AC 100-240V or DC 11-18V
- Power: Charge: 50W Max - Discharge: 5W Max
- Battery Type: LiPo/LiFe/LiIon(1-6S) - NiMH/NiCd(1-15S)
- Net Wt 632g - Dimension: 144mm x 135mm x 36mm
Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger with iD Auto Battery Identification
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service.
- Charger recognizes Traxxas iD batteries to automatically program and optimize charger settings. Charges 5-8-cell NiMH batteries and 2S and 3S LiPO batteries
- One button LiPO storage charge protects your battery investment and advanced high-resolution peak detection delivers a perfect charge
- Easy to use interface with charge progress indicator and integrated cooling fan
- Advanced Mode for full manual control of charger settings and integrated balance ports for conventional LiPO batteries
- Refer user manual for troubleshooting steps
LiPo Charger Balance Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-Fe Packs w/LCD Display Hobby Battery Charger w/Tamiya/JST/EC3/HiTec/Deans Connectors Power Supply
HTRC 80W 6A DC Lipo Charger / Discharger with Convenient Multifunction A Charger, Multifunction Convenient
-Microprocessor controlled Delta-peak sensitivity.
-High-Power and high-performance circuit.
-Automatically identify the cells counts of lithium battery section.
-Check lithium battery internal resistance.Let you know when a cell is going bad.
-Support LiHV battery.
-Support smart battery I,II,III.(need optional smart battery charging cable).
-Maximum Safety: Low Input Voltage setting,Delta-peak sensitivity. Capacity limit, processing time limit, Temperature Threshold.
-Terminal Voltage Control.
-Individual cell balancing, cell voltage Monitoring.
-Data storage and loading (Store up to 20 packs in memory).
-Battery break in and cycling.
* Operating voltage range: DC11.0-18.0 Volt/ AC to DC adapter (DC11.0-18.0V/ 6A)
* Max.charge power 80W
* Max.discharge power 10W
* Charge Current Range: 0.1-6.0A
* Discharge current range:0.1-2.0A
* Current drain for balancing: 400mAH/cell
* LiIon/LiPo/LiFe/ LiHV cells:1-6 cells
* NiCd/NiMH cells: 1-15cells
* Pb battery voltage: 220v
* Smart Battery: I II III
* Net Weight: 220g
* Dimensions: 135x86x27mm
1 x HTRC 80W 6A DC11V-18V Digital Balance Charger & Discharger;
1 x User Manual;
1 x DC Crocodile Clip;
1 x Connector Splitter;
1 x AC Adapter
- VARIETY BATTERY CHARGING: 80W 6A DC11V-18V lipo balance charger can allow you to charge a variety of battery pack types: Lipo, LiFe, Li-ion, LiHv, NiMH, NiCD, Pb battery packs, Smart Battery.
- BONUS ACCESSORIES: The AC balance charger comes with a DC Crocodile Clip and octopus multi-charging harness with Traxxas(male), Tamiya, Tamiya mini, EC3(male), JST(female), Futaba(female), XT60(male), T-Dean(male) connectors to be compatible
- WIDE VOLTAGE COMPATIBILITY: Battery Pack balance charger allow you charge Lipo: 1-6 cell, LiFe: 1-6 cell, Li-ion: 1-6 cell, LiHv: 1-6 cell, NiMH: 1-15cell, NiCD: 1-15 cell, PB: 2-24V, which meet all your needs of battery pack charging
- MULTI-FUNCTION: Charge; Balance; Discharge; Terminal Voltage Control; Lithium Battery Capacity & Voltage Checking; Battery Internal Resistance Checking; Lipo Storage Mode; Data Storage and Memory Loading; Lipo Meter; Digital DC Power.
- PACKAGE CONTENT: 1*HTRC 80W 6A DC11V-18V Digital Balance Charger; 1*DC Crocodile Clip; 1*Connector Splitter; 1*AC Adapter; 1*Manual; 18 Month Warranty
EV-Peak e2 (2Amps, 25Watts) 2S, 3S (7.4V, 11.1V) AC Lipo Balancing Battery Charger w/ WARRANTY
Balance Charges 2S & 3S LiPo batteries
Small and Compact
Easy Indicator Lights
AC Input voltage 100V-240V
Charge power 25W
Charge current 2.0A
Plug Type JST-XH
Balance current 300mA
LiPo battery cell count 2-3 Series
Indication 4x LED Capacity Indication
Dimension 65 x 110 x 33 mm
e2 LiPo Balance Charger
EV-Peak Warranty Direct through us in NY
Lipo-Safe Charge Bags: GTP1101, GTP1102, GTP1103
Lipo-Safe Charge Boxes: GTP1111, GTP1112, GTP1113
JST-XH Extension Leads: GTP1202, GTP1203
JST-XH Parallel Adapters (Charge 2 batteries at once): GTP1222, GTP1223
LiPo Cell Check / Voltage Meter: GTP1007, GTP1008, GTP1009
- SAFETY: The charger features LiPo Cell Balancing. So each cell will be charged to the proper voltage level independently. This removes the chance of overcharging a cell, potentially resulting in a fire.
- CONVENIENCE: The charger is quite compact. And it plugs directly into a wall outlet. It can be used with outlets around the world since it can handle 100V-240V with its auto-switching power supply. It features 4 easy to understand LED lights that indicate to the user how full the battery is. 1 LED indicates 25. 2 LED lights indicates 50. 3 LED lights indicates 75. And 4 LED lights, of course, indicates a full charge.
- RELIABILITY: The e2's goal is to provide reliability. EV-Peak uses the best components on the market so that the charger will work and work well for the customer. Also, since it is so efficient, there is no need for a fan. Fans can wear out, make noise, and fail after time.
- WARRANTY: EV-Peak offers a great 1 Year warranty on their chargers. This warranty covers manufacturers defects. This warranty does not cover end-user misuse or abuse. In the event of a repair/replacement the customer is responsible for shipping the unit to us in NY, while we will cover the cost of shipping the unit back to the customer.
- Radialabs wrinkle reducer 3 month supply save
- Wes cargo sled box for ski-doo
- 8w dimmable touch sensor 54 led light desk table reading book lamp
- Pfister toilet paper holder bronze
- String quilt pattern books